Beskrivelse
Notes on twisting the heat-break
To address the heat creep issues the design features a narrow steel throat with thin walls. When removing the heater block or changing nozzles, caution is required.
Before removing the heater block from the heat-break (or vice versa), heat-up the nozzle, hold the heater block and release some tightening pressure from the nozzle. Let the whole group cool down. After, you can simply unscrew the heat-break from the heater block.
To remove or replace a nozzle, never forget to secure the heater block before twisting the nozzle.
Check the Setup Guide [ 3 Pre-flight check / Step 1 Hot Tighten The Nozzle] for more detailed guidance.
Tilleggsinformasjon
| Vekt | 0,04 kg |
|---|---|
| Passer til Printer |
Omtaler
Det er ingen omtaler ennå.