Beskrivelse
Hovedkort med støtte for Klipper-firmware, for Voron 3D printere
LDO/Voron Leviathan Control Board er resultatet av et samarbeid mellom JNP og LDO etter ønske om å lage et hovedkort spesielt for Voron 3D printere.
Hovedkortet har dedikert plass for Raspberry Pi 3, 4, 5 eller Zero 2W (selges separat).
Målet med utviklingen av dette kortet var å lage et driftssikkert og holdbart hovedkort som ikke inneholder masse unyttige funksjoner, og her er kortet – med alle lovnader oppfylt.
Egenskaper
- Supports Klipper firmware
- STM32F446 Microcontroller at 180Mhz clock speed.
- Reverse polarity protection for main power supply and HV Stepper supply input
- Superior stepper driver cooling (passive)
- Dedicated mounting space for a Raspberry Pi 3,4,5 or Zero 2W
- Dedicated power supply and uart port for Raspberry Pi
- 5x Integrated TMC2209 stepper drivers.
- 2x Integrated 48V rated TMC5160 stepper drivers.
- 4x Fan ports with flyback protection, 5V/24V selectable voltage, and tachometer inputs.
- 4x Thermistor ports with 2k2 ohm pullup resistors.
- 1x Dedicated LED strip with flicker free dimming down to 1%.
- 1x Neopixel port.
- 1x Hotend power output up to 180W.
- 1x Hotbed power output up to 240W
- 1x Dedicated Z probe port with selectable voltage and integrated diode.
- 3x Endstop ports and a filament sensor port
Electrical Specifications
Parameter | Symbol | Min | Typ | Max | Unit | Comments |
---|---|---|---|---|---|---|
Main Supply Voltage | Vin | 18 | 24 | 28 | V | Supply voltage for the entire PCB except for HV stepper drivers |
HV Stepper Supply Voltage | VHV | 24 | 48 | 55 | V | Supply voltage for the HV stepper drivers |
RPi Supply Out | IRPI | 3 | A | Current rating of Raspberry Power supply output | ||
Hotend Current | Ihe | 7.5 | A | Current rating of hotend channel | ||
Heatbed Current | Ihb | 10 | A | Current rating of heatbed channel | ||
Fan Current | Ifan | 0.5 | A | Current rating per fan channel | ||
Stepper Current | Imot | 2 | A | Current rating of each TMC2209 stepper channel | ||
HV Stepper Current | Ihv_mot | 3 | A | Current rating of each TMC5160 stepper driver | ||
Neopixel Current | Irgb | 0.5 | A | Current rating Neopixel port | ||
LED-Strip Current | Iled | 0.35 | A | Current rating of LED strip | ||
Endstop IO Level | Vstop | 3.3 | 5.0 | V | Logic level of endstop input | |
Filament Sensor IO Level | Vfil | 3.3 | 5.0 | V | Logic level of filament sensor input |
Electrical Specifications
Parameter | Min | Typ | Max | Unit |
---|---|---|---|---|
Main Supply Voltage | 18 | 24 | 28 | V |
HV Stepper Supply Voltage | 24 | 48 | 55 | V |
RPi Supply Out | 3 | A | ||
Hotend Current | 7.5 | A | ||
Heatbed Current | 10 | A | ||
Fan Current | 0.5 | A | ||
Stepper Current | 2 | A | ||
HV Stepper Current | 3 | A | ||
Neopixel Current | 0.5 | A | ||
LED-Strip Current | 0.35 | A | ||
Endstop IO Level | 3.3 | 5.0 | V | |
Filament Sensor IO Level | 3.3 | 5.0 | V |
Omtaler
Det er ingen omtaler ennå.