Beskrivelse
Mercury Wash & Cure
Med Mercury X Bundle kan du enkelt vaske og herde resinutskriftene raskt og effektivt.
En knapp
Den komplettee vask eller herdeprosessen starts og justeres og overvåkes på kun en knapp. Skru på og det kommer tilsyne et lite deisplay i knappen, roter for å sette ønsket tid (maks 30minutter)
Herding
Herdemaskinens gule transparente cover blokkerer 99.9% av UVlyset, og herder modellene raskt og jevnt takket være tredimensjonal herding (fra sidene og underfra), og 360 roterende plattform.
Rens / Vasking
En forseglet tank med hele 8liters kapasitet og gummipakning for forsegling. Rens modellene trygt og effektivt.
Stor vasketank for store modeller
Takket være den store vasketanken, kan modeller i størrelse helt opp til 23cm renses i maskinen
Vann flyten som genereres under vaskeprosessen er sterk takket være et smart designet større “bølgehjul” som ligger i bunnen av karet.
- ELEGOO Mercury X WASH Machine
- Control Method: Knob + Button
- Rated Power: 12W
- Input Voltage: 110V/240V 50/60Hz
- Time Setting: 0-30mins
- Machine Size: 255mm*155mm*385.5mm
- Maximum Wash Volume:
- 180mm*121mm*153mm (with platform)
- 201mm*124mm*255mm (without platform)
- Machine Net Weight: 2.27kg
- ELEGOO Mercury X CURE Machine
- Control Method: Knob + Button
- Rated Power: 36W
- Input Voltage: 110V/240V 50/60Hz
- Time Setting: 0-30mins
- Machine Size: 246mm*230mm*363.5mm
- Maximum Curing Size: φ200mm*260mm
- Machine Net Weight: 2.4kg
360 degree three-dimensional curing
The 360° rotating turntable can solidify the model in all directions. If the UV lamp bead in the L-shaped light bar solves the problem of curing at the top of the model, and at the same time increases the bottom light source design, the bottom curing has no dead corners, so that the entire model can be cured more thoroughly, and the maximum curing size can reach 200*260mm.
Safer to use
The transparent cover can effectively block 99.9% of ultraviolet rays, and the 800ML large-capacity water tank is designed with rubber sealing tape, which is safe and reliable.
Humanized user settings
Operate the knob, press and hold for 3 seconds to turn on, the operation is simple and the interface is simple. The maximum adjustment is 30 minutes, and the cleaning and curing time can be adjusted according to your needs.
Separate curing and cleaning
With a double-connected adapter, when you are using CURE, you can also perform WASH work at the same time, saving your working time. MERCURY X WASH and MERCURY X CURE can work at the same time, one for cleaning and one for curing.
- After the model is printed, please clean and blow-dry the model before putting it into the machine.
- If the model become yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.
- Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
- Please do not use it for more than 40 minutes at a time to avoid overheating
- Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
- Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
- Packing List
- Curing Machine Body
- Curing Light
- Curing Turntable
- Anti-UV Lid
- Washing Machine Body
- Cleaning Bucket
- Cleaning Basket
- Cleaning Basket Bracket
- Adapter
- Manual
- Tools
Tilleggsinformasjon
| Vekt | 8 kg |
|---|---|
| Dimensjoner | 61 × 50 × 34 cm |
| Størrelse uten emballasje | Maskin 1: 255 x 155 x 385.5mm, Maskin 2: 246 x 230 x 363.5mm |
| Produktvekt | Maksin 2: 2.4kg, Maskin 1: 2.27kg |
Ole Martin Morseth (bekreftet eier) –
Veldig fornøyd – Enkel å bruke og gjør akkurat det den er forventet til å gjøre
Julia Sheremeteva (bekreftet eier) –
Bra kvalitet. Enkelt å bruke. Passer perfekt til Saturn 3 / Saturn 3 ultra. Liker at den har kun en stikkontakt for å gi strøm til begge enhetene. Super praktisk å ha ‘washing’ og ‘curing’ separat. Anbefaler på det sterkeste! Veldig bra produkt! Super rask levering.