Zortrax M300 – 30x30x30cm
Zortrax M300 – 30x30x30cm Zortrax M300 – 30x30x30cm Zortrax M300 – 30x30x30cm

Zortrax M300 – 30x30x30cm

SKU: 22132 Kategori:
Brand: Zortrax
kr25,490
På Lager
Beskrivelse

Zortrax M300 – Large volume professional 3D printer

Plug & create

No need to execute a difficult calibration process of the 3D printer or software. Put this 3D printer on your table, upload the model to your slicer and start 3D printing within 2-5 Minutes.

Extruder

Appropriately selected heating and cooling points in the extruder of the Zortrax M300 solve the frequent problem of inability to release material by the extruder. It can be caused by a change in the physical properties of material associated with temperature.

Build platform

The use of a two-part platform allows an easy removal of the build platform after the 3D printing process is finished. Thanks to this feature, the finished 3D model can be easily removed without causing any calibration issues or damaging of the component. Perforations on the platform allows to 3D print filament based on ABS which tend to warp. They prevent the model from peeling off during additive manufacturing process. If more adhesion is needed you can use an adhesive.

High temperature additive manufacturing

Additionally, an extra layer of raft is used as a special base for the object. This is very important for 3D printing large models. The build platform is heated to the correct temperature for each type of filament. With the new Z-Suite slicer software you can set the printing bed temperature for third-party filaments on your own. Furthermore, the Zortrax M300 allows a wide range of temperatures (from 20° C to 110° C) to 3D print using many kinds of materials.

Auto-calibration

The Zotrax M300 is formfitting with an innovative calibration system which enures that the platform is leveled correctly every time. There are five calibrating points located on the platform itself which calculate its exact position. The system can determine on which level the calibrating points should be located. In the case of a slight tilt the extruder adapts to the position of the platform while its putting on the first layers of the model. We recommend you to level the Zortrax M300 after transportation. Simply follow the instructions on the screen and your build platform will be leveled in under 5 minutes. Until you move the 3D printer no further calibration will be needed.

X and Y axis system

A system of dual X and Y axises leads the extruder with high precision. Stability and quality of 3D printing is greatly improved by using 8 smooth rods. The build platform moves very even and without vibration. This is a key factor for good-quality 3D prints.

Single Extruder Support

Creating support structure is easy thanks to Single Extruder Support system (SES). This feature allows to 3D print support structure for complex models without the need of dual extruder and additional material. With the Zortrax M300 3D printed support structure is easy to remove and efficient. The extruder is optimized to use only the exact amount of filament needed to support the model.

Compatible materials

We recommend to 3D print using Z-Filaments with features dedicated for Zortrax® M300. When you manufacture these filaments, nice results are guaranteed. If you like to experiment with materials we suggest you use PrimaVALUE, PrimaSELECT and EasyPrint filaments for good-value and safe 3D printing.

Option for an enclosed building chamber

If you are working with ABS or filaments which tend to warp we advise you to upgrade your Zortrax M300 with side covers and covering. This keeps your building chamber warm and minimizes warping.

 

 

Zortrax M300

Tekniske Detaljer

Tekniske Detaljer

PRINT TEKNOLOGI LPD™ – Layer Plastic Deposition
EXTRUDER 1 Singel Extruder
BYGGEVOLUM 300 x 300 x 300 mm
LAG OPPLØSNING 90-300 microns
PRESISJON 1.5 microns
LCD SKJERM JA
DYSE TEMPERATUR MAKS 380° C
PLATFORM TEMPERATUR MAKS 110° C
MATERIALTYPER Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG
FILAMENT DIAMETER 1.75 mm
TILKOPLINGER SD kort (inkludert)
KAROSSERI STÅL
SOFTWARE Z-Suite
FILE FORMAT .stl.obj.dxf
PRODUCT DIMENSION 490 x 490 x 590 mm
NOZZLE DIAMETER 0.4 mm
SUPPORTED OS Mac OS X / Windows XP, Windows Vista, Windows 7, Windows 8
SHIPPING WEIGHT 50 kg (110 lbs)
Omtaler (0)
Vær den første til å skrive omtale om dette produktet. Del din karakter og omtale slik at andre kunder kan bestemme seg for om dette er det rette produktet for dem.
Skriv en omtale
Din omtale
Din karakter
Name
Epost