Zortrax M200 20x20x18cm

SKU: 20608 Kategori:
Brand: Zortrax
kr14,490
Tomt på lager

Gi meg beskjed når denne varen kommer tilbake på lager.

Beskrivelse

Zortrax M200 – Professional plug&play 3D printer

With the Zortrax M200 you buy a powerful plug&play 3D printer. This machine is built very solideasy to use and offers you an excellent 3D printing experience. The M200 is set up very fast. Operating this device is easy due to its user-friendly interface and slicing software – Z-SuiteFrequent free updates improve Z-Suite functionality. Get your professional 3D printer now and experience additive manufacturing

Plug & create

You don’t need to execute a complicated calibration process of the 3D printer or software. Just turn the 3D printer on, upload the model and start 3D printing.

Extruder

Properly selected heating and cooling points in the extruder solve the frequent problem of inability to release material by the extruder. It can be caused by a change in the physical properties of material associated with temperature.

Build platform

The use of a two-part platform allows an easy removal of the build platform after the 3D printing process is finished. Thanks to this feature, the finished 3D model can be easily removed without causing any calibration issues or damaging of the component. Perforations on the platform allows to 3D print using materials based on ABS which tend to warp. They prevent the model from peeling off during additive manufacturing process.

Additionally, an extra layer of raft is used as a special base for the object. This is very important for 3D printing large models. The build platform is heated to the correct temperature for each type of filament. With the new Z-Suite slicer software you can set the bed temperature for third-party filaments on your own. Furthermore, the Zortrax M200 allows a wide range of temperatures (from 20° C to 110° C) to 3D print using many kinds of materials.

Auto-calibration

This 3D printer is fitted with an innovative calibration system which makes sure that the platform is leveled correctly every time. There are five calibrating points located on the platform itself which calculate its exact position. The system can determine on which level the calibrating points should be located. In the case of a slight tilt the extruder adapts to the position of the platform while its putting on the first layers of the model. We recommend to level the Zortrax M200 after transportation. Simply follow the instructions on the screen and your build platform will be leveled in under 5 minutes. Until you move the 3D printer no further calibration will be needed.

X and Y axis system

A system of dual X and Y axises leads the extruder with high precision. Stability and quality of 3D printing is greatly improved by using 8 smooth rods. The build platform moves very smooth and without vibration which is a key factor for good-quality 3D prints.

Single Extruder Support

Creating support structure is easy thanks to Single Extruder Support system (SES). This feature allows to 3D print support structure for complex models without the need of dual extruder and additional material. Support structure is easy to remove and efficient. The system is optimized to use only the exact amount of material needed to support the model.

Compatible materials

We recommend to 3D print using Z-Filaments with features dedicated for Zortrax® M200. When you use these filaments good manufacturing results are guaranteed. If you like to experiment with materials we suggest to use PrimaVALUE, PrimaSELECT and EasyPrint filaments for good-value and safe 3D printing.

Option for an enclosed building chamber

If you are working with ABS or materials which tend to warp we advise you to upgrade your Zortrax M200 with side covers and covering. This keeps your build chamber warm and minimizes warping.

Spesifikasjoner
Tekniske Detaljer

Tekniske Detaljer

PRINT TEKNOLOGI LPD™ – Layer Plastic Deposition
EXTRUDER 1 Singelhode
BYGGVOLUM 200 x 200 x 185 mm
PRESISJON 1.5 microns
LCD SKJERM JA
DYSE TEMPERATUR Maks 380° C
BYGGFLATE TEMPERATUR Maks 110° C
FILAMENT DIAMETER 1.75 mm
TILKOPLINGER SD kort (inkludert)
SOFTWARE Z-Suite®
FILFORMAT .stl.obj.dxf
PRODUKTSTØRRELSE 345 x 360 x 430 mm
DYSE DIAMETER 0.4 mm
ANBEFALT OPERATIVSYSTEM Mac OS X / Windows XP, Windows Vista, Windows 7, Windows 8
VEKG 13 kg
FRAKTVEKT 20 kg
Nedlastinger

Nedlastinger

Z-SUITE

Omtaler (0)
Vær den første til å skrive omtale om dette produktet. Del din karakter og omtale slik at andre kunder kan bestemme seg for om dette er det rette produktet for dem.
Skriv en omtale
Din omtale
Din karakter
Name
Epost