GRATIS LEVERING! Prisen inkluderer hjemlevering (der det er mulig), frakttid over hele Norge er ca 3 – 5dager
Varen sendes fra eksternlager
Ute etter noe av det råeste markedet har å tilby i denne prisklassen?
Da trenger du ikke lete lenger!
Raise3D Pro2 – Høy kvalitet og pålitelig Dual Extruder 3D printer
Raise3D står for produksjon av høykvalitets printere som er svært pålitelige og til pris iforhold til nivå, få andre produsenter er i nærheten av-
Lag utrolige ting raskt med Raise3D Pro2 Dual Extruder 3D printer. Med denne maskinen kan du lage høykvalitets deler, små serieproduksjon eller prototyper.
De viktigste nye trekk ved Raise3D Pro2:
- Presis kontrol over byggeplattformen
- Optimalisert extruderhode for best mulig extrusion.
- Integrert filamentsensor som kan følge med på filamentstatusen.
- Høykvalitets silikon printoverflate for god adhesion på byggeflaten.
- Aluminium magnetisk overflate med forbedret 4 + 9 punkts system
- Miljøvennlig og trygg takket være luftfilter og lukket system
- Improved factory calibration enables you to start fast with 3D printing
- Integrated camera allows to monitor manufacturing results from remote
- Optimized nozzle for optimal extrusion
- Hot-end upgrade
- Very extensive accessories
- Software controllable active cooling fan for best possible cooling
- High quality optical end stops
- Large building chamber: 305 x 305 x 300 mm
3D printing is cumbersome, complicated and gives bad results? – Not with the Raise3D
Let the Raise3D Pro2 fascinate you. 3D printing is cumbersome, complicated and gives bad results? That was yesterday. Yet, the Raise3D Pro2 convinces with many intelligent functions. There are very few 3D printers on the market that can integrate all this functionality into one device. The vast majority of these devices cost a multiple of the Raise3D Pro2.
Intuitive 7-inch color touch display
Control this dual-extruder 3D printer through its 7-inch color touch display. Are you able to operate a smartphone? If so, you can use the intuitive interface of your Raise3D’s. This will keep your 3D printing under control. Let your masterpieces become real with the Raise 3D Pro2.
Heated building platform and enclosed building chamber
Thanks to its generous building volume, you are able to manufacture very large components and prototypes. 3D print parts that reach a length of 305 x 305 x 300 mm. Furthermore, the building chamber of this 3D printer is closed. This allows you to process more sophisticated materials such as ABS, HIPS, PET-G, PLA +, PP and ASA. This is made possible by a heated building platform (up to 110 ° C), the completely enclosed building chamber. Heat the heated extruder up to 300 ° C. Transform your creative ideas into new real objects.
Open filaments system – Decide what filament you want to 3D print with
Use your favorite material. The Raise3D Pro2 is an open platform and can be processed with a variety of available filaments. The filaments only requirement of the filament is to have a 1.75 mm diameter. You decide which material you want to use!
Optimized double extruder
- Precise control of the building platform
- Optimized extruder head with improved torque performance and dual gear drive
- Optical filament sensor – This will show you the filament status and immediately stop the 3D printer when the filament is exhausted. After refilling you can continue working
Dual extruders for different filaments, materials – 3D print complex components
Make parts with the dual extruder parts from two different filaments, materials and support materials. If you use PVA or HIPS as the second filament, you can realize very complex components with overhangs. After finished 3D printing, you can simply dissolve the support filament and get great results.
New 3D printing bed for better adhesion
Now Raise3D Pro2 works with a new silicone heating bed. This increases adhesion of your components on the platform. The base of this forms a magnetic aluminum bed. This is equipped with an improved 4 + 9 points lock system.
Air filter for improved air quality reduces fumes and smells
Do you want to use this 3D printer without disturbing fumes and smells? The Raise3D Pro2 allows you to keep your air clean – with its built-in air filter.
Resume Function after power failure 3D printer
Power failure – And now? With this 3D printer you won’t be in trouble. After the power has returned, simply resume your 3D printing using the RESUME function. The built-in 1000 mA battery stores the 3D printing progress. Then, the 3D printing can easily be continued. This function will save you filament, costs and time that would be caused by interruptions.
Fast and precise production with Raise 3D Pro2
The Raise3D Pro2 allows you to 3D print at high speed and produce at a very high level. In the Z direction, the remarkable resolution of a minimum of 0.01 mm layer thickness can be achieved. 3D print fine structures and very smooth surfaces. When you work with such a high resolution we recommend you only to manufacture small parts, since the construction time increases sharply.
Buy the Raise3D Pro2 to get a professional, reliable and affordable dual extruder 3D printer for Additive Manufacturing.
Print Technology: FFF
Build Volume (W×D×H): 12×12×11.8 inch / 305×305×300 mm
11×12×11.8 inch / 280×305×300 mm*
Machine Size (W×D×H): 24.4×23.2×29.9 inch / 620×590×760 mm
Print Head: Dual-head with electronic lifting system
Filament Diameter: 1.75mm
XYZ Step Size: 0.78125, 0.78125, 0.078125 micron
Print Head Travel Speed: 30 – 150 mm/s
Build Plate: Heated aluminum build plate with magnetic holding
Max Build Plate Temperature: 110 ºC
Build Plate Material: Silicone
Build Plate Leveling: Pre-calibrated leveling
Supported Materials: PLA / ABS / HIPS / PC / TPU / NYLON / TPE / FLEX / PETG / Bronze-Filled / Wood-Filled / Carbon Fiber Enforced
Nozzle Diameter: 0.2/ 0.4/ 0.6/ 0.8mm
Max Nozzle Temperature: 300 ºC
Operating Sound: 50 dB
Connectivity: Wi-Fi, LAN, USB port
Monitoring: Live camera
* When you are printing with dual material.
Power Supply Input: Universal 100-240 VAC, 50/60 Hz
Power Supply Output: 600 Watts, 24 VDC
Slicing Software: ideaMaker
Supported File Types: STL, OBJ
Supported OS: WINDOWS/ IOS/ LINUX
Machine Code Type: GCODE
User Interface: 7 inch Touch Screen
Network: Ethernet 802.11b/g/n Wifi 2.4GHz/5GHz
Resume Print after Power Outage: Second Generation
Screen Resolution: 1024*600
Motion Controller: ARM Cortex M7.400MHZ FPU
Logic Controller: Freescale imx6, Quad core 1Ghz ARM processor
Onboard Flash: 8GB
OS: Embedded Linux
Ports: SD-Card*1, USB 2.0*2, Ethernet*1