Beskrivelse
Dette settet konverterer Bowden oppsettet på Creality CR-6SE, CR-Max eller CR-10 Smart til en direct drive extruder på en enkel, kompakt og svært effektiv måte. Settet kan brukes med original hotend, men man kan også oppgradere med Slice Engineering Hotends
Diverse linker:
Main Features
- It converts the compatible printers from Bowden to direct extruder.
- Extra load on strain gauge is limited to the LGX Lite itself.
- Housing is light and insulated from the Extruder to allow for strain gauge levelling.
- It is compatible with all stock hotends and cooling fans.
- Housing is easy to remove for maintenance and service of the hotend and extruder.
- Z-position of the fan shroud may be adjusted.
Additional Features
Weight: 65g.
E-steps : 562 @ 16 microsteps.
Klipper’s rotation_distance : 5.7.
Stepper motor current : 0.45 to 0.65A max.
Max operating temperature : 90°C.
It may be upgraded with Slice Engineering hotends:
- Copperhead Screw Mount;
- Mosquito;
- Mosquito Magnum;
- Mosquito Magnum + Air.
Product includes:
- 1x LGX Lite extruder mounting set
- 1x PA12 extruder mount
- 1x PA12 hotend mount
- 4x M3x6 button head screw
- 2x M3x10 button head screw
- 2x M3x8 button head screw
- 1x M3x30 screw
- 1x M3 square nut
- 1x Capricorn cutting fixture
- 1x 70mm Capricorn tube
- 1x LGX Lite Arrow housing set
- 1x PA12 front housing
- 1x PA12 left wing
- 1x PA12 right wing
- 1x PA12 top lid
- 1x PA12 fan shroud
- 1x PA12 (breakout board/cables) cover
- 2x M3x8 button head screw
- 1x M3x16 screw
- 2x M3x20 MC6S screw
- 3x M3 square nut
- 1x LGX Lite Extruder
1x LDO Nema 14 20mm Rund pancake steppermotor m/ 1m lang kabel og JST-XH4 pin
1x 2mm Hex nøkkel
1x “Powered by Bondtech” klistremerk
1x Push Fit Collar
1x 30mm PTFE Tube
8x M3 muttre for montering - 1x Powered by Bondtech sticker
Tilleggsinformasjon
| Vekt | 0,2 kg |
|---|---|
| Dimensjoner | 15,5 × 11,5 × 10,5 cm |
| Passer til Printer |
Omtaler
Det er ingen omtaler ennå.