Phaetus 3D dyse – Ruby V2
- 0,6mm
- 0,8mm
Phaetus 3D Dyser med Rubintupp
“One nozzle to rule them all”
Herdet dyse med rubintupp gir deg en uslitelig dyse som varer livet ut med normalt vedlikehold
Kan brukes med alle filamenttyper som feks PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI, Carbon Fibre, Steel, Wood, Boron Carbide, Tungsten og filament med fosforiske pigmenter.
Rubintuppen i seg selv er uslitelig, og kombinert med herdet stål så gir det deg en dyse som tåler det meste og temperaturer helt opp til 550c
Svært god kvalitetsdyse med toleranse på +/- 0,006mm
Leveres i tupp diameter 0,4mm -> 0,8mm for 1,75 filament
Kompatibel med de fleste printerene på markedet – bruker M6 gjengestigning, samme som e3d, reprap, creality +++
ruby Structural optimization | The structure of the ruby optimized with a 60° cone angle at the feeding port makes the flow rate at the inner hole faster and prevents the nozzle clogging.
nano-coating | Applying DLC nano-coating on the whole nozzle makes the friction coefficient of the inner and outer wall of nozzle is only 0.03, which greatly reduces the problem of filament sticking.
Combined structure | The combined assembly structure of ruby tip and nozzle body reduces filament leakage caused by the ruby falling or shifting, which finally improves the printing reliability.
Hardened steel material | Hardened steel with a hardness of HRC60 and above, which is the first choice for abrasive and high temperature materials printing.
