Magigoo PA

Magigoo PA

kr219
TOMT I EN ELLER FLERE STØRRELSER

- Send meg varsel når varen er kommet på lager -

Beskrivelse

Magigoo PA is designed for professional use, to work exclusively with
Polyamide filaments.(Nylon) The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

Why Magigoo PA?
PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA66 and PA6.

Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

Nylon filaments prove to be challenging materials for FDM printing due to their lower
adhesion to conventional 3D-printing build surfaces and their higher tendency to warp.
Furthermore there are several classes of PA filaments each behaving differently.

MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was
developed to work with a wide number of PA types

Spesifikasjoner
Fraktvekt
0.15 kg
Bed
Omtaler (0)
Vær den første til å skrive omtale om dette produktet. Del din karakter og omtale slik at andre kunder kan bestemme seg for om dette er det rette produktet for dem.
Skriv en omtale
Din omtale
Din karakter
Name
Epost